lo
c
king g
r
oove
lo
c
king
c
lip
s
mall
r
idge
de
s
k
r
ail &
w-
c
hannel
s
liding
c
lip
s
ho
r
t lo
c
k
Fixed Book Box Assembly
1. First insert the book box into
the desk. As illustrated, orient
the sliding clip with the short
lock down, and positioned at
the outside desk rail and
w-channel location (Figure 3).
Note:
During insertion, flex
sidewalls of box outward to
assure that the outer rails of the
box fully engage the steel
tracks of the desk. Make sure to
hold the box level as it is
pushed into the desk tracks so
the outer rails of the box ride
under the guide tabs bent over
each track.
2. From inside the book box, at
the w-channel position, locate
the locking groove of the book
box. At that location, with the
small ridge down, insert the
locking clip into the desk rail
and w-channel location. Snap
the locking clip into the
sliding clip to secure
(Figure 3).
3. Repeat the steps above at the
other side of the desk, making
sure to orient the sliding clip
to the outside of the desk at the
desk rail and w-channel
location and the locking clip to
the inside.
Assemble units as described herein only. To do otherwise may
result in instability. All screws, nuts and bolts must be tight-
ened securely and must be checked periodically after assem-
bly. Failure to assemble properly, or to secure parts may result
in assembly failure and injury.
I n t e l l e c t
®
B o o k B o x
Assembly Instructions
Figure 3
