Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Part # 2.80209
Instruct
®
Classroom Furniture - All Terrain
®
Mobile Instructor’s Desk
Assembly Instructions
1330 Bellevue Street • P.O. Box 8100 • Green Bay, WI 54308-8100 • Tel 1-800-424-2432 • www.ki.com
© 2019 Krueger International, Inc. All Rights Reserved • Code KI-AI-000058/KI/PDF/1019
lower post
bushing
landing
pad post
#8 x / ”
screws
1
2
landing
pad post
assembly
landing pad
(underside)
Figure 3
landing pad post
bushing (upper)
lower post
bushing
1
/ -20 x 4
4
”
bolt
landing pad
(underside)
landing
pad post
assembly
1
/ ” flat
washer
4
1
/ -20”
nut
4
1
/ ” flat
washer
4
1
/ -20”
nut
4
storage
tower
Figure 4
landing
pad post
assembly
# / -20 x 4
1
4
”
bolt
# / -20 x 4
1
4
”
bolt
Flat Landing Pad Kit
1. Carefully place the flat landing
pad upside down onto a soft,
protective surface (Figure 3).
2. Locate the hardware pack for the
flat landing pad and identify the
parts by referencing Figure 3.
3. Insert four
1
/
4
-20 x 4” bolts into
the four (upper) landing pad
mount bushings as illustrated
(Figure 3).
4. Secure the upper bushings
with the
1
/
4
-20 x 4” bolts to
the underside of the landing
pad using four #8 x
1
/
2
” screws
(Figure 3).
5. Place the lower post bushings
down onto the landing pad posts
as illustrated (Figure 3).
6. Carefully position the landing pad
post assemblies with installed
bushings, posts & bolts such
that the four bolts insert down
through the four mounting holes
in the top of the tower (Figure 4).
7. From inside the tower, locate the
1
/
4
-20 bolts inserted through the
top and place a
1
/
4
” washer and
1
/
4
-20 nut onto each bolt. Tighten
nuts to secure landing pad to
tower top (Figure 4).
