Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
3
Instruct
®
Classroom Furniture - All Terrain
®
Mobile Instructor’s Desk
Assembly Instructions
3. Position one table support bracket
over the pre-drilled holes in the
side of the storage tower and
secure using three
1
/
4
-20 x
5
/
8
”
hex washer bolts as illustrated.
Repeat procedure for second table
support bracket at adjacent side to
the first. (Figure 4).
4. Carefully turn table assembly
to the upright position and rest
the table onto the table support
brackets installed to storage
tower. Align pre-drilled mounting
holes at underside of table with
holes in both table support
brackets and secure brackets to
table using three #14 x
7
/
8
” black
screws per bracket. Next using
two #10 x
1
/
2
”screws, attach
modesty panel vertical flange to
side of the tower through
pre-drilled holes (Figure 4).
Pull Installation
1. Locate the pull/hardware packet
that is shipped inside the storage
tower.
2. Using the two screws provided
with the flush mount pull, fasten
the pull to the door as illustrated.
Finish the inside of the door with
two black plastic screw caps
(Figure 5).
#14 x / ”
7
8
black screw
1
5
/ -20 x / ”
4
8
hex washer bolt
#14 x / ”
7
8
black screw
#10 x / ”
1
2
screw
storage tower
storage
tower
door
