1330 Bellevue Street • P. O. Box 8100 • Green Bay, WI 54308-8100 • Tel 1-800-424-2432 • www.ki.com
© 2011 KI All Rights Reserved • Litho in USA • Code KI-61979R1/HT/GT/0711
Assemble units as described herein only. To do otherwise may
result in instability. All screws, nuts and bolts must be tight-
ened securely and must be checked periodically after assem-
bly. Failure to assemble properly, or to secure parts may result
in assembly failure and injury.
I n q u i r e
®
Ta b l e s
A s s e m b l y I n s t r u c t i o n s
Note:
Worksurfaces 72" and 84"
in length require the installation of
two worksurface stiffeners.
11. Position two worksurface
stiffeners over pre-drilled holes at
underside of worksurface. Attach
each stiffener using ten #10 x
3
/
4
"
wood screws. Take care to not
over-tighten, which could strip out
pilot holes (Figure 7).
Figure 7
wo
r
k
s
u
r
fa
c
e
s
tiffene
r
#10 x
3
/
4
”
wood
scr
ew