background image

1330 Bellevue Street • P.O. Box 8100 • Green Bay, WI 54308-8100 • 1-800-424-2432 • www.ki.com

© 

2014 Krueger International, Inc. All Rights Reserved • Code KI-62656/KI/PDF/1114

LATCH ADJUSTMENT

1.  With the table in the use position, apply weight to the unit to hold it against the 

floor. Using the allen wrench provided, turn the allen bolt, on the inside of the 

center leg, clockwise to tighten the latch and counter-clockwise to loosen the 

latch.

2.  Test latch by removing weight from the table. Push down on the center of the 

table and release the latch located on the upper center leg between the table 

tops. Hold the latch in the released position and slowly lift the table 1 to 2 

inches. Remove hand from the latch and with one hand on either table side lift 

table into a tee position. Spring assists in the center legs will help you lift the 

table to this position and will maintain the table in the tee position.

3.  Push the table back down to the use position, Verify that the table latches lock 

the unit down by pulling up lightly on the center of the table. The table should 

rise no more than 

1

/

2

”.

4.  Retest release to verify smooth release.

5.  Apply paraffin wax or approved lubricant to the strike area several times per 

year.  

Отзывы: