2
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Barron
®
& Portico™ - Lightweight and Short Fold T-Base Folding Table
Assembly Instructions
Lightweight and Short Fold T-Base
Folding Table
Tools Required
• Phillips Screwdriver
Hardware Included for T-Base
• (8) #14 x 1” Wood Screws
Note:
The instructions below
illustrate the assembly of both the
lightweight folding T-base (Figure 3)
and the short fold T-base (Figure 4).
The item that is required to make the
base a short fold base is the short
fold adapter plate (Figure 4). It is
only on one T-base of each pair. The
adapter plate allows the folded leg to
be clamped shut while overlapping
the opposite T-leg.
1. Place the table top upside down onto
a soft protective surface
(Figures 3 & 4).
2. Locate the four pre-drilled holes
at each end of the table. Align
the holes of each T-base with the
pre-drilled holes in the table. The
folded legs of the T-bases must be
positioned toward the center of the
table (Figures 3 & 4). If installation
requires a short fold base (Figure 4),
the short fold leg must be positioned
over the standard leg.
3. Secure bases to the table with four
#14 x 1” wood screws provided,
not to exceed 60 in/lbs of torque
(Figures 3 & 4).
standard
T-base
leveling
glide
#14 x 1”
screw
standard
T-base
table top
Figure 3 - Lightweight Folding T-Base
standard
T-base
leveling
glide
table top
short-fold
T-base
#14 x 1”
screw
short-fold
adapter plate
Figure 4 - Short Fold T-Base
