All Terrain
®
Binder Tower
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
3
Adjustable Shelf Assembly
1. Remove the shipping tape
securing the shelf and brackets
during shipment.
2. Hook the shelf brackets into the
slots at the inside of the cabinet
as illustrated. Make sure the
brackets are at the same height on
both sides (Figure 5).
3. Install the shelf by setting it onto
the brackets. Make sure the shelf
is pushed all the way back into the
cabinet (Figure 5).
Door Hinge Adjustment
1. For overlay adjustment, turn
eccentric screw (A). The overlay
can be reduced a maximum of
-2 mm (Figure 6).
2. For Height adjustment
(+/- 2 mm) first unscrew fixing
screw (B). Detach center stop (C)
with screwdriver, adjust the height
of the door and tighten fixing
screws (B) (Figure 6).
