background image

Assembly Instructions

All Terrain

®  

Binder Tower

February 2014

Assemble units as described herein only. To do otherwise 
may result in instability. All screws, nuts and bolts must be  
tightened securely and must be checked periodically after  
assembly. Failure to assemble properly, or to secure parts 
may result in assembly failure and personal injury.

Caster with Outriggers Assembly

1. Locate the caster/hardware packet 

that is shipped inside the binder 

tower. Secure or remove any loose 

components inside the tower.

2. Carefully turn storage tower on 

it’s back or upside-down on a soft 

protective surface. 

3. Thread the casters into the 

outriggers. Locking casters must 

be positioned to the front of the 

cabinet as illustrated. Tighten the 

jamb-nut of each caster to the 

bottom of the tower with a wrench 

(Figure 1).

4. Gently raise the cabinet to it’s 

upright position on the casters 

(Figure 1).

Inboard Caster Assembly

1. Locate the caster/hardware packet 

that is shipped inside the binder 

tower. Secure or remove any loose 

components inside the tower.

2. Carefully turn storage tower 

  upside-down on a soft protective 

surface. 

3. Thread the casters into the bottom 

of the binder tower. Locking casters 

must be positioned to the front of 

the cabinet as illustrated. Tighten 

the jamb-nut of each caster to the 

bottom of the tower with a wrench 

(Figure 2).

4. Gently raise the cabinet to it’s 

upright position on the casters 

(Figure 2).

Отзывы: