38
IV. WHEELCHAIR USE & CONFIGURATION
W. Anti-Tips (Continued)
How to Use the Anti-Tips
1. Flipping the Anti-Tips Up
a. Pull the anti-tip (Fig. 33:A) rearward to disengage the rotary lock studs (Fig. 33:B).
b. Rotate the anti-tip upwards.
c. Reset the anti-tip back onto the rotary lock studs and ensure the studs are nested into the
alignment stops.
2. Removing the Anti-Tips
a. Depress the buttons (Fig. 33:C) on the anti-tips.
b. Pull the anti-tip straight back to remove the anti-tip from the receiver.
c. To reinstall, press the buttons in and push the anti-tips back into the receivers, aligning the
holes in the receiver with the front detent button.
X. Surface Temperature
WARNING: Handling of wheelchair surfaces with elevated temperatures can result in a
potentially hazardous situation which, if not avoided, could result in injury.
Be aware that prolonged exposure to direct sunlight or other sources of radiant heat may
increase the temperature of surfaces on your wheelchair above recommended limits estimated
by standards.
A
B
C
Fig. 33
Содержание Focus CR
