Ki Mobility Axiom DL, Инструкция пользователя и гарантия

Страница: 8 / 31

7
A. Fitting Your Axiom Back and Wheelchair (Continued)
General Setup
NOTICE: If ordered with installation on chair, skip to Step 4.
1. Remove backrest shell from cover. Install backrest bracket to shell with stud plate (Fig. 3:A),
two washers (Fig. 3:B) and two dome nuts (Fig. 3:C). Install so stud plate studs are 1” from
the top of each bracket slot. Loosely tighten hardware. Repeat on opposite side.
2. Install housing (Fig. 4:C) to bracket with two bolts (Fig. 4:A), two lock washers (Fig. 4:B), two
washers (Fig. 4:D), two spring discs (E) and a nut plate (Fig. 4:F). Loosely tighten hardware
and repeat on opposite side.
3. Install backrest mount clamp (Fig. 5:B) to mount plate (Fig. 5:C) using two lock washers (Fig.
5:E), two spherical washers (Fig. 5:D) and a dual nut (Fig. 5:A). Bolts should thread inwards
from the outside of the chair. Choose bolts, from the two sizes provided, that adequately
thread through dual nut without coming up short or sticking out excessively. Loosely tighten
hardware. Repeat with second set of backrest mount clamps.
A
B
C
1”
Fig. 3
C
E
F
B
A
D
Fig. 4
A
B
B
C
D
E
F
Fig. 5