4
Pitching your tent/awning
6.
Zip any open doorways shut, Connect onto
Campervan using your chosen method, then peg
out front storm straps.
5.
Once all tubes are inflated lift the awning and push the tubes until the awning pops up and sits correctly
8.
Slide fibreglass pole into sleeve on side door
canopy and locate ends into plastic cups
9.
Fit metal adjustable support pole into PVC pockets
on side of awning (NON DOOR SIDE)
7.
Adjust the corner pegs if needed and tighten
webbing straps, then peg all remaining pegging
points.
9.
Adjust tension of pole and secure plastic catch
-
only one side needs this pole as the opposite side
is tensioned with the exterior fibreglass pole
10.
Lastly peg out the base of the Drive away door,
groundsheet can also be pegged down to avoid
tripping hazards.