5
4
Cleaning & Maintenance
(B) Removing and cleaning the rolling brush
1. Press the BRUSH LOCKING SWITCH until a “click” sound is heard and the brush locking plate is
opened to remove the rolling brush from main brush nozzle.
2. Carefully clear/remove/pull out any tangled hair or dirt.
3. Ensure the rolling brush is correctly placed back into the main brush by installing back brush locking
plate into its place until a “click” sound is heard.
4. Attention
• DO NOT rinse the ROLLING BRUSH under water to clean.
NOTE: Ensure the ROLLING BRUSH is correctly placed back into the appliance.
• Do not clean the appliance’s surface with metal sourcing pads as it may scratch the surface. Use
only a damp soft cloth to clean it.
• Do not use abrasive chemicals, cleaning solvents like petrol, thinner or benzene to clean the
appliance and main brush.
Tips: An obstruction in the rolling brush will make brush movement or flow difficult. It is advisable to
clean the rolling brush on regular basic. (subject to individual usage)
Brush locking
switch
Rolling
brush
Rolling
brush
Brush locking
switch
Brush locking
plate
Brush locking
plate
Safety Precaution Information
Parts identification
1. Handle
2. Speed Control Button
3. ON/OFF Power Button
4. Dust Tank
5. Dusk Tank Bottom Cover Release Clip
6. HEPA Filter
7. Filter Protector
8. Metal Tube
9. V-shape Brush
10. LED Light Indicator
11. Main Brush Release Button
12. Charging Slot
13. Battery Level/Charging Indicator
14. Battery Pack
15. Battery Pack Release Button
16. Wall Charger Base
17. Main Body Release Button
18. Adaptor
19. 2 in 1 Nozzle
(Crevice Nozzle with Small Brush)
14
1
2
3
5
6
7
8
11
9
10
4
17
19
18
13
12
16
15
Rear of battery
* Pictures are for illustration purpose only.
