Model
Working Voltage
Power
Adaptor Input Voltage
Adaptor Output Voltage
Battery Type
Filtration Type
Dust Tank Capacity
Suction Power
Operating Time
Charging Time
Net Weight
Product Dimension (LxWxH)
VC9679
22.2Vd.c.
120W
AC100-240V~ 50/60Hz
27Vd.c.
Li-Ion Battery Pack
HEPA
0.5Litre
High Speed: 8kPa
Low Speed: 4-5kPa
High Speed: 20-23min
Low Speed: 45-50min
4.5 hours
2.1 kg
278 x 245 x 1092mm
:
:
:
:
:
:
:
:
:
:
:
:
:
Specifications
*Specifications are subject to change without prior notice.
6
7
How to use
2. Assemble main unit with battery unit
-
Press the battery unit into the main unit battery compartment till a "click" sound is heard.
3. Assemble main brush, tube and main body
-
Insert upper end of main brush into lower end of the tube, till a “click” sound is heard.
-
Insert the upper end of the tube into the lower end of main unit a “click” sound is heard.
4. a) Assemble the accessory to main unit
-
Insert the 2 in 1 nozzle firmly into the main unit hole.
b) Assemble the accessory to the tube
-
Insert the 2 in 1 nozzle into the lower end of the tube, till a “click” sound is heard.
5. ON/OFF Power Button & Speed Control Button
-
Press the ON/OFF Power Button to start or stop the vacuum cleaner operation. Press the Speed
Control Button to adjust the vacuum cleaner to high/low speed.
6. Charging
a) Before charging, ensure use only the adaptor provided together with the set.
b) Put the vacuum onto the wall mount bracket. Connect the adaptor to the main. Once fully
charged, all Battery Level Indicator light will be illuminated.
c) Connect the charger plug to power.
d) Charge the product indoors and keep the indoor temperature between 4°C and 35°C.
e) The white charging indicator will turn on and keep flashing during charging to indicate that the
machine is being charged. Upon completion of the charging, the three bars of the charging
indicator will all turn white and stop flashing.
f) It takes 4-5 hours to complete the charging. Do not overcharge the battery.
g) After the completion of the charging, take the charger off the charging base. Do not use the
product while it is being charged.
h) You may hang the machine on the charging base when not using it, but make sure the charger is
removed.
i) When the battery is going to be depleted, please recharge with adaptor.
7. Wall charging base
-
Fix the wall charging base near to the socket.
-
Put the main unit onto the wall charging base.
How to use
1. Assemble dust tank with motor unit
-
Put the dust tank to pins on motor unit lower part.
-
Push the dust tank till "Click" sound is heard.
1
3
4
2
Battery unit
release button
or
(C) Main unit assembly guide
