KHIND SF1821, Инструкция по эксплуатации

Страница: 3 / 16

1
1. Ensure that the fan is switched off from the supply mains before removing the fan guard for cleaning.
2. Use this fan with specified voltage as stated on the rating sticker. Before connecting fan to the AC mains,
make sure the voltage specified corresponds to the AC supply to your house.
3. Do not insert finger or other objects into the fan guard.
4. Do not attempt to repair the fan. Always return to our authorised service agents for repairs 。
5. Do not immerse the motor assembly or any parts of the fan inside the water or other liquids.
6. Do not use the appliance outdoors or near windows. Rain drops may cause electrical hazards.
7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
8. Do not operate this appliance without a fan blade, broken or bent fan blade.
9. Handle fan blade with care during cleaning.
10. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
11. The ventilation holes of rear motor cover must be free of dust & dirt. Please use a soft cloth or vacuum
cleaner to clean it frequently.
12. Ensure that the fan is switched off from the supply
mains before removing the guard.
Note:
For wall fan, Ensure that the fan is fixed at a height that is
more than 2.5m from the floor.
Parts Identification
2
5
6
7
8
9
10
16
17
1
11
13
15
14
12
18
19
3
4
1. Front Guard Ornament
2. Front Guard
3. Guard Ring
4. Guard Ring Screw Cover
5. Fan Blade
6. Blade Screw
7. Rear Guard 8. Rear Guard Screws
9. Motor Body
10. Oscillation Knob
11. Speed Selector Knob
12. Bolt
13. Power Cord
14. Extension Pole
SF1821
15. Height Adjustable Lock
16. Upright (Stand) Pole
17. Base
18. Base Weight
19. Base Washer & Lock Nut
WF1821
1. Front Guard Ornament
2. Front Guard
3. Guard Ring
4. Guard Ring Screw Cover
5. Fan Blade 6. Blade Screw
7. Rear Guard
8. Rear Guard Lock
9. Motor Body 10. Power Cord
11. Fan Body
12. Speed Selector Knob
13. Speed Pull String
2
5
6
7
8
9
1
12
13
10
11
3
4
2