KHADAS Tone2, Быстрый старт

Страница: 14 / 20

FAQ
Why does Windows require the Khadas USB driver?
The Khadas USB driver provides ASIO support and removes the latency and sample rate
conversion issue experienced with the default Windows USB driver for DACs.
What is Balanced RCA?
A new balanced audio connector standard, designed by Khadas for small form-factor
desktop DACs. It is backwards compatible with standard RCA plugs and cables, more
details visit
https://khadas.com/balanced-rca
Which Khadas single board computers can be connected to the Tone2 Maker Kit’s 40-pin
2.54mm header?
The VIM1S, VIM3, VIM3L and VIM4 are all supported, however you will need to solder a female
40-pin header to the Tone2 first. Please refer to the instructions in
docs.khadas.com /tone2
for more information.
Please note that the Khadas Warranty Service is no longer valid once you have performed
soldering on the Maker Kit.
Which Khadas single board computers can be connected to the 14-pin 0.5mm FPC
header on the bottom of the Tone2 Maker Kit?
The VIM3, VIM3L, VIM4 can be connected to the Tone2 Maker Kit in this way via their onboard
female M.2 connector. You will need to purchase the Khadas T2V adapter board for this
purpose. For specific information, please refer to the instructions in
docs.khadas.com /tone2 .
I have connected DC power to the VIN interface, however the Tone2 Maker Kit does not
power on, please help.
Firstly, ensure that the supplied voltage is between 4.8 to 14V. Secondly, please check if there
are any discrepancies with the DC power connector’s pin layout. Please refer to the instructions
in
docs.khadas.com /tone2 for the pin layouts for each I/O interface on the Tone2 Maker Kit.
What is the electrostatic protection level of the Tone2 Maker Kit?
All interfaces have undergone static discharge testing, the protection level is 1000V for
contact and 3000V for non-contact. Do not touch the PCBA’s circuits when the board is
powered on to avoid undesirable effects; such as damage to the board.