Quad Camera DVR
29
1
1
0
0
.
.
A
A
p
p
p
p
e
e
n
n
d
d
i
i
x
x
I
I
I
I
(
(
T
T
r
r
o
o
u
u
b
b
l
l
e
e
s
s
h
h
o
o
o
o
t
t
i
i
n
n
g
g
)
)
Q: Why does the DVR not work when connected to a power supply?
A:
Make sure that the power switch at the rear of the unit is switched on.
Q: Why is the DVR system responding slowly after boot up?
A:
The DVR system will check all the data on the Hard Disk during when it is starting up,
this will slow the system down.
A Hard Disk error will also cause the system to slow down, while it checks to drive.
Q: Why does the DVR system repeatedly reboot after being switched on?
A:
The Hard Disk may not be formatted in FAT32 format, or may have a logic error.
Check if the color format (PAL/NTSC) in the record setting is correct. The system will
keep rebooting if the DVR is set to record in PAL mode and the video input is set to
NTSC.
Q: Why does the DVR system freeze while playing back or checking playback information?
A:
Make sure the Hard Drive is connected within the Hard Drive Bay correctly.
Q: Why is a Monitor or TV connected to the DVR system displaying in only Black & White?
A:
Make sure the DVR colour format ant the Monitor / TV colour format are the same, also
check if the Monitor / TV supports colour in PAL or NTSC.
Q: Why is the live-view not displaying in colour correctly?
A:
Reboot the DVR, load the default factory settings and reset the colour setting in the DVR
Menu.
Q: Why is a Monitor or TV not displaying an image?
A:
Check that the power supply is connected and working and that the video output is
connected
correctly.
Check that the power switch is ON.
If the monitor is displaying OFF, set the Channel to on in the DVR settings menu.
Digital Video Recorder
