2
6.
Assemble the Fairlead Bracket to the RZR Frame as
shown in Figure 5 and the exploded view above
using the 5/16” hardware supplied.
7.
Assemble your Fairlead to the fairlead bracket
while routing the cable thru. Attach your hook.
8.
Replace hardware removed from Step 2.
9.
Using the instructions provided with your winch,
wire accordingly.
CONTACTOR LOCATION
Contactor location is just above the passengers feet as
shown in Figure 6.
(Note: You may need to re-drill the
contactor mounting holes as there are a few contactors that
will not have the same mounting bolt pattern that is on your
RZR)
SWITCH IGNITION WIRE
1.
Crimp the red wire from the remote or switch
to the included Piggyback Quick Connect.
2.
Remove the ORANGE electrical wire from the
accessory outlet and connect it to the
piggyback electrical connector. Figure 7
3.
Connect the Piggyback connector to the
accessory outlet.
Mini-Rocker Switch Hardware Kit
This allows you to mount your usual handle bar mounted switch
to almost any desired location.
a.
Remove handlebar mount hardware from the
switch.
b.
Locate desired mounting location
c.
Mark and drill two switch holes through dash
using switch housing as a template
d.
Drill a 3
rd
hole for the switch wiring.
e.
Assemble per Figure 8
Fairlead Bracket
“Figure 5” Mount Fairlead Bracket
“Figure 8” Mini-Rocker Mounting
“Figure 6” Contactor Location
Contactor Location
“Figure 7” Switch Ignition Wire
Orange Wire