KFE KF-F3-LP страница 7 Скачать руководство пользователя | Manualshive

Страница: 7 / 22

background image

7

NOTICE

When this appliance is installed with casters, it must be installed with the casters supplied, a
connector complying with either ANSI Z21.69 CSA 6.16 and a quick-disconnect device complying
with ANSI Z21.41 CSA 6.9. It must also be installed with restraining means to guard against
transmission of strain to the connector, as specified in the appliance manufacturer instructions.

!

WARNING

If disconnection of the restraint is necessary to move the appliance for cleaning, etc., reconnect it
when the appliance is moved to its original installed position.

!

WARNING

When  this  appliance  is  installed  with  casters,  it  must  be  installed  with  the  casters  supplied,  a
connector  complying  with  either  ANSI  Z21.69  or  CAN/CGA-6.16  and  a  quick  disconnect  device
complying with either ANSI Z21.41 or CAN1-6.9.  It must also be installed with restraining means to
guard  against  transmission  of  strain  to  the  connector,  as  specified  in  the  appliance  manufacturer's
instructions.

!

WARNING

All fryers must be restrained to prevent tipping in order to avoid the splashing of hot liquid. The means
of restraint may be the manner of installation.

NOTICE

Unit must be level to assure maximum performance. Improper leveling may void warranty.

«
...
5
6
7
8
9
...
»

Содержание KF-F3-LP























Отзывы:

Нет отзывов

Похожие инструкции для KF-F3-LP

Бренд: Presto Страницы: 10

CoolFry ADF-171N

Бренд: Aroma Страницы: 16

Бренд: Kambrook Страницы: 6

Centauro CLGG70214 Series

Бренд: mabe Страницы: 138

Бренд: BERJAYA Страницы: 4

Бренд: Giorik Страницы: 46

Бренд: MAGUIRE Страницы: 127

Бренд: Kalorik Страницы: 40

Sterling MDB Series

Бренд: ACS Страницы: 4

Бренд: Blue Seal Страницы: 40

Бренд: Carlton Страницы: 15

Бренд: Haier Страницы: 15

Бренд: Haier Страницы: 16

Бренд: Haier Страницы: 36

Бренд: Haier Страницы: 80

Бренд: Haier Страницы: 90

Бренд: Haier Страницы: 106

Бренд: Haier Страницы: 124

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды