10
Conversion Kit Instructions for
Gas Countertop Hot Plat
e
Models:
12”-2 burners 24”-4 burners 36”-6 burners
E -
These conversion instructions are for conversion of the HOT PLATE. The instructions provide in this kit are for
the conversion of Natural Gas to L.P. gas and refer to the conversion of the unit and kit provided. An
authorized licensed technician must be called to perform the complete conversion of the unit. Failure to
properly convert this unit,
can
result
in
serious
injury,
property
damage
or
death
and
will
void
warranty.
Hot plate Conversion Kit Instructions
Do not attempt gas conversion by yourself. Gas conversion of your unit is to
be made by a certified/licensed technician.
CONVERSION
Instructions are for conversion from Natural Gas to Propane (L.P.) on all models. The conversion should be
done before connecting the unit to the gas supply. Units are shipped from the factory equipped for use on
natural gas. Parts necessary for L.P. (liquid propane) are provided with the unit.
Turn off the main gas
supply before doing any maintenance.
1. Remove the knobs and front panel. 2. Unscrew bolts and pilot valve, then remove
the manifold.
3. Replace the orifice fittings into the valve.
Note:
Unit Number on side of orifice fittings.
4. Replace the front panel and knobs
Pictured is the plastic insert. Pull off insert from
octagon cap and reverse the plastic insert
position so that the L.P. position is attached to
the octagon cap head.
5. Before installing the included convertible
regulator,
unscrew
the
octagon
cap.
You
can
read
(NAT) on the plastic insert attached to the head of
the cap; flip it over and snap back in place.