Your Magravs Power Unit, A New Paradigm in Energy
Copper wires have been used to transmit electricity via electron vibration. This is the old,
outdated paradigm, which relies on a very small spectrum of what exists in nature.
Now, with magnetical-gravitational (MaGravs) technology, power is released and
transmitted via the nano-coating of copper. The nano layers absorb ambient plasma
energy and release usable plasma, which is much more powerful than simple electron
vibration.
Plasma is found everywhere around us - in the air, our bodies, around the planet and in
outer space. Through the nano layers, this boundless energy is then converted to usable
energy which can power appliances at home.
Our first generation Magravs Power Units required CONDITIONING in order for the Unit
to operate properly. With advances in technology, we are now
able to omit this, thereby allowing the Magravs Power Unit to be
truly
plug and play
.
However, nano-coating all wires in the
household will still happen in a gradual and systematic manner
through the MaGravs Power Unit.
It is important to remember that once the MaGravs Power Unit is
connected and turned on, do not turn off or unplug the unit from
that point onwards. It MUST keep running continuously in order
for it to work effectively.
Please read all the instructions below before connecting your
Magravs Power Unit to your household socket.
It is time for Humanity to reconnect with the energetic plasma
world!
What You Need To Know
Installation of the Magravs Power Unit is simple:
there are no hard and fast rules, only guidelines
every installation is different
and
you
get to
decide
what's optimal for your home
the point of the Magravs Power Unit is to allow plasma energy to act on the wiring
of your home
Simply connect your Unit to an available socket at home. It's been found that the more
distance between the breaker box and the socket, the better results that are achieved.
The greatest benefit is seen with appliances connected to the rest of the
household.
Appliances connected to the Unit
simply serve as
a load
from
which plasma is reflected back into the wiring of the household.
Installation
1 – Determine "Live" or "Hot" wire of the socket
Included with your Magravs Power Unit is a Phase Meter.
Using the Phase Meter which is included in your Magravs Power unit, determine the “hot” or
“Live” wire. The plug in which the phase meter turns on its light permanently or flashes much
more quickly than the other plug is where the live wire is located.
2 - Connect the Magrav Unit
Plug correctly by matching the
live plug of the Unit.
Note the markings on both plugs –
these indicate the "Live" or "Hot"
prong/receptacle of the plugs. If
the Magravs Power Unit is
connected wrongly to the
“Neutral” wire instead of “Live”,
there is a very high possibility of
the unit being rendered inoperative
and therefore fall outside the scope
of manufacturer’s warranty.
