60
Normally send and receive data, so we choose SK Service into Figure 4-8-6 in the selection of
SK_KEYPRESSED as shown in Figure 4-8-7
Figure 4-8-5
Figure 4-8-6
Figure 4-8-7
Figure 4-8-8
4
、
We select "SK-KEYPRESSED", click on it as shown in Figure 4-8-9. We can see that there is a "write"
button, click to enter the interface shown in Figure 4-8-10, in Figure 4-8-10, We click on the "red box" to
enter the data you want to send. After the input is completed, click "send" to send the data, as shown in
Figure 4-8-10.
