8
NOTE THAT THE SLIDING VALVE MUST BE CLOSED TO OPERATE THE FILTER CLEANING SYSTEM
9. Attach crevice nozzle or upholstery nozzle to the hand tube.
9 - VACUUMING DRY MATERIAL:
! ATTENTION-For vacuuming of dry material filters must be installed.
10. Check to see that on/off switch, Figure 1 (5), is off (
0
).
11. Plug the power cord into an electrical outlet.
12. Start vacuum by turning switch on (
I
).
13. This vacuum cleaner is equipped with a filter which can collect fine dust, including ashes
from fireplaces. Ashes must be cold. Do not attempt to vacuum hot or warm ash. Max.
Temperature of the ashes should not be warmer than 104 degrees Fahrenheit / 40
degrees Celsius.
14. This dry vacuum cleaner is also equipped with a post-filter to catch dust in the exhaust air.
15. Figures 5, 6. Use Filter Cleaning System to maintain performance before and after each use.
When working with fine dust or cold ash, the filters can get clogged, decreasing the
performance of the vacuum as well as the life of the filters. To operate the Filter Cleaning
System:
a. Turn the switch on (I).
b. Block the inlet (A) and wait 5 seconds. This will close the air flow and build up
pressure in the tank.
c. Push the button (B) 5 times fast.
Figure 4
Figure 5
Figure 6
