KoolSpot Silver Series Solar Shades
Description
Part Number
Qty Included
Clutch Bracket
CB8
1
Stationary Bracket
SB8
1
Plastic Bracket Covers
PBC8
2
Top Tube Clutch Plug
TTCP8
1
Top Tube Stationary Plug
TTSP8
1
Bottom Rail
BR8
1
Bottom Rail Caps
BRC8
2
Chain
CH8
1
Shade
SE8
1
Screws
SCR8
5
Tension Device
TDE8
1
Tools required: phillips screwdriver, leveling device (lazer level, standard level, etc.), and
power drill (if pre-drilling the holes).
INSTALLATION INSTRUCTIONS
Warranty and maintenance
To clean your KoolSpot shade simply rinse with water and scrub with any non-abrasive
cleaner (using bleach or other abrasive cleaners will void your warranty). Roll the shade
down to air dry.
Your KoolSpot Solar Shade fabric has a warranty of three (3) years.
Step 5: Install tension device
The Tension Device keeps the chain secure and
reduces the risk of strangulation.
Install the Tension Device in a location that
keeps the chain taught (see Fig. K).
Place the chain in the Tension Device, then
snap it closed. Attach the Tension Device to the
wall.
303.652.6164 (p)
www.KeystoneFabrics.com
Figure K
Congratulations on the purchase of your KoolSpot Solar Shade. Please read these instructions
carefully prior to installing your shade. Please call if you have any questions regarding
installation or if you are missing any parts.
Adjusting chain tension
Figure L
If the chain tension is
too tight or too loose
when you raise or
lower your shade, the
tension of your chain
can be adjusted.
Simply remove
the Plastic Bracket
Cover from the Clutch
Bracket and loosen the
screws to loosen chain
tension. Tighten
screws to tighten chain
tension (see Fig. L).
Clutch Bracket
(CB8)
Stationary Bracket
(SB8)
Top Tube Clutch Plug
(TTCP8)
Figure A
Bottom Rail
(BR8)
Bottom Rail Caps
(BRC8)
Chain
(CN8)
Shade
(SE)
Plastic Bracket Cover
(PBC8)
Plastic Bracket Cover
(PBC8)
12/07
Top Tube Stationary Plug
(TTSP8)
Tension Device
(TD8)
Loosen all screws
Replace the Plastic Bracket Cover.
