Installing the Keyspan Mini Port Replicator Hardware
The following hardware installation instructions provide a basic overview on installing the Keyspan
Mini Port Replicator in a USB port. For detailed instructions on how to connect USB devices
your specific computer, please refer to the USB Device Install section in your computer's user's
manual.
Step 4
-
Connect the Adapter to your USB port
Attach the Adapter to your computer by connecting the Adapter's USB cable into any built-in USB
port on your computer or USB Hub. It is not necessary to turn off your computer when attaching
the Adapter.
Step 5
-
Hardware Installation Complete!
Your Keyspan Mini Port Replicator is ready for use now that you have installed hardware and
software.
If you are connecting USB devices to the Mini Port Replicator, simply connect them to either USB
port. These devices will function just as they do on any other USB hub.
If you are connecting a serial device to the Mini Port Replicator, please proceed to the
Configuring Your Serial Device
section in this manual.
If you are connecting a printer to the Mini Port Replicator, please proceed to the
Configuring Your Parallel Printer
section in this manual.
Keyspan:Mini Port Replicator for Windows-v3.2 User Manual
This User Manual applies to the Keyspan Mini Port Replicator Software for Windows.
(rev 02jun19JA)
Page 6