… touch the difference
5
Version 1.0 (2008/11/15) ● © 2008 by MaxPoint Handelsges. mbH
•
Only for USB: Check, if your
BIOS s
ystem supports USB keyboards
*
.
Some manufacturers offer
BIOS
updates on Internet for download.
•
Only for USB: Ensure in your system settings, that the used USB connection was not de
-
activated in your operating system
*
.
•
Should your system
-
updates be unsuccessful, it is recommendable to test the keyboard with another PC with the same
operating system to rule out hardware damage.
* Refer to the documentation of your PC for details.
3. Specialities of the keyboard
3.1 Palm rest
The ACK
-
201, ACK
-
260 and ACK
-
298 have an optionally integrable
palm rest,
which is individually adjustable and lockable, allowing
non-
fatigue
typing.
3.2 Tilt feet
The keyboards have on the bottom side two adjustable tilt feet for the perfect
ergonomic tilt angle and non
-
fatigue operation.
3.3 ACPI functions
The PS/2 version
of ACK
-
201 and the
ACK-
260 are equipped with
3 ACPI keys:
This functionality has to be supported by the BIOS and respectively to the operating
system (Refer to the documentation of your PC for details.)
•
Power
Boot
/
shut down the PC
•
Sleep
Put the PC into stand
-
by state
•
Wake up
Wake up your PC out of stand
-
by state
3.4 Integrated PS/2 port
The ACK
-
298 UR has sidewise an integrated PS/2 port for
direct connection of a mouse cable. For installation of the mouse please
shut down the computer.
4. How to clean the keyboard
•
Dust can be removed either with a brush, with
soft compressed air, or with a vacuum cleaner with brush head
nozzle.
•
Remove fine dirt with a not
-
too
-
damp cloth.
•
DO NOT
use any aggressive detergents, solvents, or gasoline in order to clean the keyboard.
Manufacturer's Disclaimer Statement
The information in this document is subject to change without notice and does not represent a commitment on the part of the vendor. No warranty or representation, either expressed
or implied,
is made with respect to the quality, accuracy or fitness for any particular purpose of this document. The manufacturer
reserves the right to make changes to the content of this document and/or
the products associated with it at any time without obligation to notify any person or organization of such changes. In no event will the manufacturer be liable for direct, indirect, special,
incidental or consequential damages arising out of the use or inability to use this product or documentation, even if advised
of the possibility of such damages. This document contains materials
protected by copyright. All rights are reserved. No part of this manual may be reproduced or transmitted in any form, by any means or for any purpose without expressed written
consent of its
authors. Product names appearing in this document are mentioned for identification purchases only. All trademarks, product names or brand names appearing in this document are registered
property of their respective owner.
