10
STATus Subsystem
98
Keysight U2722A/U2723A Programmer’s Reference
STATus:QUEStionable:NTRansition
Syntax
STATus:QUEStionable:NTRansition <value>
This register serves as a polarity filter between the Question Condition and
Question Event registers. When a bit in the Question NTR register is set to 1, then
a 1-to-0 transition of the corresponding bit in the Question Condition register
causes that bit in the Question Event register to be set.
STATus:QUEStionable:NTRansition?
These reads the value of the Question NTR (Negative-Transition) register.
Parameter
For example, to enable bit 4, the corresponding decimal value would be 16.
Remarks
– The following table lists the bit definitions for the Questionable Status
registers.
– The
command will set all bits in the NTR register to 0.
NOTE
For more information on the SCPI Status System, refer to
Item
Type
Range of values
Default value
<value>
NR1
A decimal value which corresponds to the binary-weighted sum
of the bits in the register (refer to the table below).
Preset = 0
Bit number
Decimal value
Definition
0 to 3 Not Used
0
0 is returned.
4 OT
16
The over-temperature protection has tripped.
5 to 15 Not Used
0
0 is returned.
Содержание u2722a
