Keysight U2600A Series, Руководство пользователя

Страница: 13 / 73

Keysight U2600A Series User’s Guide 13
List of Figures
Figure 2-1 Connector in vertical view . . . . . . . . . . . . . . . . . . . . . .32
Figure 2-2 Connector in horizontal view . . . . . . . . . . . . . . . . . . . .32
Figure 2-3 Pins configuration for U2651A . . . . . . . . . . . . . . . . . . .33
Figure 2-4 Pins configuration for U2652A . . . . . . . . . . . . . . . . . . .35
Figure 2-5 Pins configuration for U2653A . . . . . . . . . . . . . . . . . . .37
Figure 2-6 Connector (J1) 55-pin . . . . . . . . . . . . . . . . . . . . . . . . .39
Figure 3-1 Isolated digital input bit through a photo coupler . . .43
Figure 3-2 The maximum and minimum allowable input voltage
at DI
in
and DI
COM
and the absolute voltage range
for DIO to see a logic high . . . . . . . . . . . . . . . . . . . .43
Figure 3-3 Isolated digital output is switched on with load . . . . .45
Figure 3-4 Isolated digital output is switched off with load . . . . .45
Figure 3-5 Enabling the Interrupt Operation Register will allow
it to send a signal, “1” to the Status Byte Register
when either the logic level for bit 301 or bit 302
changes from “0” to “1”. . . . . . . . . . . . . . . . . . . . . .49
Figure 3-6 Flowchart for interrupt function operation . . . . . . . . .51
Figure 3-7 Flowchart for trigger function operation . . . . . . . . . . .53