3
Setup Options
68
Keysight U1731C/U1732C/U1733C User’s Guide
Setup Menu Summary
The Setup menu items are summarized in the table below. Click the respective
“Learn more” pages for more information on each menu item.
Table 3-2
Setup menu item descriptions
Legend
Available settings
Description
Learn more on:
Ai
, Z, L, C, R, ESR, or DCR
Set the measurement type that the LCR meter powers up in.
Default is the auto identification (
Ai
) mode.
100 Hz, 120 Hz, 1 kHz,
10 kHz, or 100 kHz
Set the test frequency that the LCR meter powers up in. Default
is 1 kHz.
D, Q, or
θ
and P or S
Set the inductance (L) secondary parameter and measurement
mode that the LCR meter powers up in. Default is quality factor
(Q) and series (S).
D, Q, or
θ
and P or S
Set the capacitance (C) secondary parameter and measurement
mode that the LCR meter powers up in. Default is dissipation
factor (D) and series (S).
D, Q, or
θ
and P or S
Set the resistance (R) secondary parameter and measurement
mode that the LCR meter powers up in. Default is phase angle
(
θ
) and series (S).
FACt or USEr
Set the open/short CAL mode that the LCR meter powers up in.
Default is factory (FACt).
05° to 45
°
Set the phase angle condition for the auto identification (
Ai
)
mode. Default is 10
°.
Ft01 to Ft16 or Ur01 to Ur16
Set the limit category (factory or user) and set (01 to 16) that the
LCR meter powers up in. Default is Ft01.
H01 to H16 or L01 to L16
0 to 19999
Set the
high and low limits for each variable user set. See
for the user default values.
Содержание U1731C
Страница 1: ...Keysight U1731C U1732C U1733C Handheld LCR Meter User s Guide ...
Страница 12: ...12 Keysight U1731C U1732C U1733C User s Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Страница 16: ...16 Keysight U1731C U1732C U1733C User s Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Страница 40: ...1 Introduction 40 Keysight U1731C U1732C U1733C User s Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...