Keysight u1701b, Быстрый старт

Страница: 7 / 11

U1701B Quick Start Guide
Actions Steps
To cycle through maximum, minimum, average, and
present readings
• MAX , MIN , AVG or MAX AVG MIN annunciator
will be turned on respectively to indicate which
value is being displayed
Press
momentarily
To exit the recording mode Press for
more than 1 s
To enable relative function
• Relative function shows the difference between
the measured value and the offset reference value.
The display may show a non-zero value due to the
presence of test leads. Use the relative function to
nullify the residual.
• Relative function can operate in both auto and
manual ranging mode but the function cannot be
set when an overload value exists.
• REL annuciator will be displayed.
Press
To renew the relative value Press again
To exit relative mode Press for
more than 1 s
To select manual range and to turn off the AUTO
annunciator
Press
To step up a range at a time Press again
To select auto-range
• In auto range mode, the AUTO annunciator is
displayed and the instrument will select an
appropriate range for resolution if the reading is
greater than the maximum available range.
OL will
be displayed.
• The instrument will select a lower range when the
reading is less than 9% of full scale.
Press for
more than 1 s
To enable the tolerance mode and to set the display
value as a standard reference
• TOL annunciator will be displayed.
• The tolerance will be displayed on the secondary
display.
• The instrument range will be locked.
Press