Installation Note N5242-90010 45
Description of the Upgrade
All Instruments
Step 24. Enable Option 029
Procedure Requirements
—
The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must be running.
—
A keyboard must be connected to the network analyzer.
Option Enable Procedure
1. To start the option enable utility, press UTILITY
, then
,
then
. An option enable dialog box will appear.
2. Click the arrow in the Select Desired Option box. A list of available options
will appear.
3. In the Select Desired Option list, click 029 - Full Noise Measurements.
4. Using the keyboard, enter the license key in the box provided. The license
key is printed on the license message you received from Keysight. Enter
this key exactly as it is printed on the message.
5. Click Enable.
6. Click Yes in answer to the displayed question in the Restart Analyzer? box.
7. When the installation is complete, click Exit.
Option Verification Procedure
Once the analyzer has restarted and the Network Analyzer program is again
running:
1. On the analyzer’s Help menu, click About Network Analyzer.
2. Verify that “029” is listed after “Options:” in the display. Click OK.
Step 25. Verify Option 028 is Not Installed
Procedure Requirements
—
The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must be running.
—
A keyboard and mouse must be connected to the network analyzer.
Verify Option 028 is Not Installed
—
On the toolbar at the top of the PNA display screen, click Help.
System
Service
Option Enable
If Option 029 has not been enabled, perform the
again. If the option is still not enabled, contact
Keysight Technologies. Refer to