Keysight N9913B, Руководство пользователя

Страница: 780 / 896

780 Keysight N9938-90006 User’s Guide
System Settings
GPS – Distance Settings
5. Press ’file type’ Data (.xxx) to enable/disable the data file type (default =
Off). (e.g., Image (.png) ON OFF , CSV Data (.csv) ON OFF , etcetera).
6. Repeat steps 3 through 5 as required.
7. Press Done Edit to exit the current data type softkey menu.
8. Press Done to exit the Preferences menu and save your Preferences.
Group Save File Types
— State+Trace (.sta) – Enables/Disables .sta as a group. file to be saved when
the Quick Save (Save/Recall 9) hardkey is pressed for ~3 seconds.
— State (.sta) – Enables/disables .sta files as a group file to be saved when
the Quick Save (Save/Recall 9) hardkey is pressed for ~3 seconds.
— Image (.png) – Enables/disables .png files as a group file to be saved when
the Quick Save (Save/Recall 9) hardkey is pressed for ~3 seconds.
— CSV Data (.png) – Enables/disables .csv data files as a part of the group
files to be saved when the Quick Save (Save/Recall 9) hardkey is pressed for
~3 seconds.
— S1P Data (.s1p) – Enables/disables .s1p data files as a part of the group
files to be saved when the Quick Save (Save/Recall 9) hardkey is pressed for
~3 seconds.
— S2P Data (.s2p) – Enables/disables .s2p data files as a part of the group
files to be saved when the Quick Save (Save/Recall 9) hardkey is pressed for
~3 seconds.
— Matalab Data (.mat) – Enables/disables .mat data files as a part of the
group files to be saved when the Quick Save (Save/Recall 9) hardkey is
pressed for ~3 seconds.
— SDF Data (.sdf) – Enables/disables .sdf data files as a part of the group files
to be saved when the Quick Save (Save/Recall 9) hardkey is pressed for ~3
seconds.
CAT (Distance Units)
Choose the CAT distance units (i.e., Meters (default), Feet, Inches). See “DTF
Units” on page 73 .
How to select CAT distance units:
1. Press System 7
>
Preferences
>
Preferences
2. Then Edit for each of the following:
— Distance Units:
— Meters (default)
— Feet