Keysight N9913B Скачать руководство пользователя страница 750

Страница: 750 / 896

Data Analysis Features
All about Trace Math

750 Keysight N9938-90006 User’s Guide

All about Trace Math

Trace Math is available in

CAT

(excluding DTF measurements),

Mode, and FOPS (under USB

Power Meter mode).

A trace is a series of measurement data points that are connected to form a line. This ‘live’ data

trace is updated as data points are measured.
A memory trace is a live trace that has been stored in the FieldFox volatile memory. It then becomes

static, meaning it is not updated with measurements. It can be displayed on the screen by itself, or

with a data trace for comparison purposes.

— In NA mode, memory traces are the same color as data).
— In CAT mode and FOPS, the data trace is displayed in

yellow

and the memory trace is displayed

blue

How to display data and memory traces

Press

Trace 6

Press

Math and Memory

then

Data->Mem

to store the current live trace into memory. A ‘beep’

sounds to confirm the data trace has been saved to memory. There is no display annotation

that indicates that the memory trace has been stored.

Then choose from:

—

Press

Data

to view only the data trace.

—

Press

Memory

to view only the memory trace.

—

Press

Data & Memory

to view both the live trace and the stored memory trace.

How to perform Trace Math

Trace math is performed between a live trace and a memory trace. When one of the following math

operations are selected, the yellow data trace displays the current measurement with the selected

trace math applied. The math operation symbol indicated below in [brackets] is displayed on the

lower left corner of the screen.

Press

Trace 6

If not already stored, press

Data->Mem

to store the current live trace into memory.

Then

Data Math

Then choose one of the following:

—

Data + Mem

[D+M] Current measurement data is added to the data in memory.

Noise Figure (NF—Option 356) does not have trace math, but does have

the ability to display data and memory traces. Refer to

“How to display

data and memory traces”

Содержание N9913B

































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание N9913B

Отзывы:

Похожие инструкции для N9913B

Бренды по названию

Популярные бренды

Keysight N9913B, Руководство пользователя

Результаты поиска

Содержание N9913B

Отзывы:

Похожие инструкции для N9913B

Бренды по названию

Популярные бренды