Installation Note N9010-90072
41
Option MTU and MTP, MultiTouch User Interface Upgrade Kits
7.
. Use a ¼” open-end wrench to prevent the SMA female connector on W28
from twisting. Use a 5/16” torque wrench to torque the nut on W27 to 10 inch-pounds.
Figure 28
Torque Cable W28 onto W27
8.
If Option EXM, External Mixing, is not installed and the Keypad Overlay which accommodates
Opt EXM (
) is installed, locate the black hole plug (
) in the kit. Insert
the hole plug in the EXT MIXER port opening in the upper right corner of the front panel.