manualshive.com logo in svg

Keysight N5247-60116, Установочная инструкция

Поделиться
Скачать
Keysight N5247-60116 Скачать руководство пользователя страница 39

Installation Note N5247-90116                                                                                                                                  39

Description of the Upgrade
Installation Procedure for the Upgrade

Step 21. Remove Option 028 License

Procedure Requirements

— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must 

not

 be running.

— A keyboard and mouse must be connected to the network analyzer.

Option 028 License Removal Procedure

1.

To start the Keysight License Manager, press 

Start > Keysight License 

Manager > Keysight License Manager

 . A Keysight License Manager dialog 

box will appear.

2.

Right click the on the desired option and click 

Delete

.

3.

In the Select Desired Option list, click 

028

. 

4.

In the Keysight License Manager dialog box that appears, press or click 

Yes

 to confirm delete.

5.

A message displays stating that the option removal was successful.

Step 22. Enable Option 029

Procedure Requirements

— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must 

not

 be running.

— Refer to the license message you received from Keysight: Verify that the 

analyzer’s model and serial numbers match those on the license message 

you received from Keysight.

— A keyboard must be connected to the network analyzer.

If Option 28 is not loaded on your PNA, proceed to 

“Step 22. Enable Option 

029” on page 39

. 

For this step, you will need a USB flash drive.
A single license file may contain more than one feature.

Содержание N5247-60116















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды