Installation Note N5222-90118 13
Installation Procedure for the Upgrade
“Step 20. Install the A13 13.5 GHz (Source 2) Synthesizer Board and Cables.”
“Step 21. Install the Test Set Cables.”
“Step 22. Reinstall the A19 Test Set Motherboard.”
“Step 23. Install Cables on the A19 Test Set Motherboard.”
“Step 24. Replace the Front Panel’s Lower Dress Panel.”
“Step 25. Reinstall Front Panel Assembly.”
“Step 26. Install the Overlay.”
“Step 27. Install the Front Panel Jumper Cables.”
“Step 28. Position the Cables and Wires to Prevent Pinching.”
“Step 29. Reinstall the Inner Cover.”
“Step 30. Reinstall the Outer Cover.”
“Step 31. Remove Option 217 License.”
“Step 32. Enable Options 417.”
“Step 33. Perform Post-Upgrade Adjustments and Calibration.”
“Step 34. Prepare the PNA for the User.”
Step 1. Obtain a Keyword and Verify the Information
Follow the instructions on the Software Entitlement Certificate supplied to
obtain a license key file for installation of this upgrade. Refer to
.
Verify that the model number, serial number, and option number information
on the license key match those of the instrument on which this upgrade will be
installed.
If the model number, serial number, or option number do not match those on
your license key, you will not be able to install the option. If this is the case,
contact Keysight for assistance before beginning the installation of this
upgrade. Refer to
“Contacting Keysight” on page 4
.
Once the license key file has been received and the information verified, you
can proceed with the installation at step 2.
If the model number, serial number, or option number do not match those
on your license key file, you will not be able to install the option. If this is
the case, contact Keysight for assistance before beginning the installation
of this upgrade. Refer to
“Contacting Keysight” on page 4
.
