Security Features & Document of Volatility 18
SSD Removal & Installation Procedures
Installing the SSD
Installing the SSD
1.
Ensure that the instrument power is turned off.
2.
Locate the SSD Assembly placement location on the instrument’s rear
.
Figure 6-3
Instrument Rear Panel & SSD Assembly Location
3.
Use the U-shaped handle (see
) that is attached to the SSD
Assembly to align the instrument SSD slots (see
) with the SSD.
Figure 6-4
Align with Instrument SSD Slots
4.
Push the U-shaped handle to place the SSD into the instrument.
Figure 6-5
SSD Assembly details—U-Shaped Handle & Thumbscrew
5.
Turn the thumbscrew on the SSD panel, as shown in
above to
secure the SSD Assembly to the rear panel. If the thumbscrew is difficult
by hand, use a TORX T15 screwdriver to tighten it.
