Keysight N4372E Lightwave Component Analyzer User’s Guide
85
User Interface Reference
5
Differential
If you select this mode, means the LCA uses a differential electrical input
or output for this measurement.
Whether the differential signal is the input to the DUT or the output from
the DUT, this uses ports 2 and 3 of a 4- port network analyzer.
Single-Ended
If you select this mode, the LCA uses a single-ended electrical input or
output for this measurement.
LCA System Settings
Figure 19
Graphical user interface of the LCA software
Wavelength (nm)
• If you have not selected to use the optional External Input, select the
wavelength of the laser source and the optical power meter use for
measurements.
• If you have selected to use the External Input, you can enter the
wavelength of the external source here. This wavelength is used by the
optical power meter.
Содержание N4372E
