Introduction
Keysight N2870A-Series and N2894A Passive Probes User’s Guide
6
Cleaning the Probe
Disconnect the probe and clean it with a soft cloth dampened with a mild soap and
water solution. Make sure the probe is completely dry before reconnecting it to an
oscilloscope.
Handling the Probe
Handle the probe with care to avoid injury, especially when it is fitted with the extra
thin and sharp spring contact tip.
CAUTION
The probe cable is a sensitive part of the probe and, therefore, you
should be careful not to damage it through excessive bending or pulling.
You should also avoid any mechanical shocks to this product in order to
guarantee accurate performance and protection.