Making Measurements
2
To Make Measurements Without Interrupting Your DUT
N2820/1A User’s Guide
39
To Make Measurements Without Interrupting Your DUT
The supplied Make-Before-Break (MBB) connectors allow you to
easily connect and disconnect your probe without interrupting the
Device-Under-Test (DUT). With the MBB connector you can
quickly probe multiple locations on your DUT without having to
solder or unsolder the leads. The MBB can be used with all
R
SENSE
probe heads including the N2825A user-defined probe head.
Figure 16
Probing with MBB Connector on DUT
As shown in
on page 40, MBB connectors consist of a
receptacle and header. A sensor lead with socket snaps onto the
receptacle. The header has two 0.025” square pins that are
soldered onto pads with 2.54 mm (0.1”) contact-pitch spacing.
Содержание N2820A
