Making Measurements
2
Quick Start
N2820/1A User’s Guide
23
Quick Start
Step 1.
Attach the Sensor Leads
The probe heads do not come with the leads soldered on them.
Instead, you must solder on one of the following types of sensor
leads to the probe head.
• Accessory un-socketed leads (22 AWG).
• Accessory socketed leads (22 AWG).
• Your own leads.
The socketed leads are designed to plug directly onto the following
items:
• Standard PC board headers with 2.54 mm (0.1”) contact-pitch
spacing.
• MBB accessory headers mounted on the PC board. You can
quickly snap the socketed lead on and off the MBB header. To
learn about the MBB accessory, refer to
Measurements Without Interrupting Your DUT”
1
Position the sensor leads into the head’s access hole as shown in
Figure 4
Placing the Leads into the Tip’s Access Hole
2
Flip the head as shown in
and insert the leads up through
the PC board’s solder holes
TP1
and
TP2
. Insert the
RED
(+) lead at
TP2 and the
BLACK
lead at TP1. Solder the leads in place.
Содержание N2820A
