Keysight N2780B Скачать руководство пользователя страница 2

Страница: 2 / 48

Notices

2017
No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation into

a foreign language) without prior agreement

and written consent from Keysight Technolo-

gies, Inc. as governed by United States and

international copyright laws.

Manual Part Number

N2780-97008

Edition

Edition 4, March 2017
Printed in Malaysia
Keysight Technologies, Inc.

1900 Garden of the Gods Road

Colorado Springs, CO 80907 USA

Warranty

The material contained in this document is

provided “as is,” and is subject to being

changed, without notice, in future editions.

Further, to the maximum extent permitted by

applicable law, Keysight disclaims all war-

ranties, either express or implied, with regard

to this manual and any information contained

herein, including but not limited to the

implied warranties of merchantability and fit-

ness for a particular purpose. Keysight shall

not be liable for errors or for incidental or

consequential damages in connection with

the furnishing, use, or performance of this

document or of any information contained

herein. Should Keysight and the user have a

separate written agreement with warranty

terms covering the material in this document

that conflict with these terms, the warranty

terms in the separate agreement shall con-

trol.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

U.S. Government Rights

The Software is "commercial computer soft-

ware," as defined by Federal Acquisition Reg-

ulation ("FAR") 2.101. Pursuant to FAR

12.212 and 27.405-3 and Department of

Defense FAR Supplement ("DFARS")

227.7202, the U.S. government acquires

commercial computer software under the

same terms by which the software is custom-

arily provided to the public. Accordingly,

Keysight provides the Software to U.S. gov-

ernment customers under its standard com-

mercial license, which is embodied in its End

User License Agreement (EULA), a copy of

which can be found at

http://www.key-

sight.com/find/sweula

. The license set

forth in the EULA represents the exclusive

authority by which the U.S. government may

use, modify, distribute, or disclose the Soft-

ware. The EULA and the license set forth

therein, does not require or permit, among

other things, that Keysight: (1) Furnish tech-

nical information related to commercial com-

puter software or commercial computer

software documentation that is not custom-

arily provided to the public; or (2) Relinquish

to, or otherwise provide, the government

rights in excess of these rights customarily

provided to the public to use, modify, repro-

duce, release, perform, display, or disclose

commercial computer software or commer-

cial computer software documentation. No

additional government requirements beyond

those set forth in the EULA shall apply, except

to the extent that those terms, rights, or

licenses are explicitly required from all pro-

viders of commercial computer software pur-

suant to the FAR and the DFARS and are set

forth specifically in writing elsewhere in the

EULA. Keysight shall be under no obligation

to update, revise or otherwise modify the

Software. With respect to any technical data

as defined by FAR 2.101, pursuant to FAR

12.211 and 27.404.2 and DFARS 227.7102,

the U.S. government acquires no greater than

Limited Rights as defined in FAR 27.401 or

DFAR 227.7103-5 (c), as applicable in any

technical data.

Safety Notices

CAUTION

notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION

notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in personal

injury or death. Do not proceed

beyond a WARNING notice until the

indicated conditions are fully

understood and met.

Содержание N2780B

















































Результаты поиска

Содержание N2780B

Отзывы:

Похожие инструкции для N2780B

Бренды по названию

Популярные бренды

Keysight N2780B, Руководство пользователя

Результаты поиска

Содержание N2780B

Отзывы:

Похожие инструкции для N2780B

Бренды по названию

Популярные бренды