Keysight MXR2RACK, Руководство по установке

Страница: 3 / 24

Rack Mount Kit for MXR-Series Oscilloscopes Installation Guide 3
In This Guide
This guide contains instructions for installing the Keysight MXR2RACK Rack
Mount Kit for MXR-Series Oscilloscopes. The rack mount kit provides a support
shelf and hardware for mounting Infiniium MXR-Series oscilloscopes into
Electronic Industries Association (EIA) standard 19-inch (487-mm) rack cabinets.
Included Parts
The rack mount kit includes the following parts:
• Support tray (54925-00411)
• Trim plates:
• Bottom trim plate (54925-24112)
• Top trim plate (54925-24111)
• Two side trim plates (54925-24113)
• BNC connectors to be inserted into the bottom trim plate (1250-2199)
• Black rubber stoppers to plug holes in bottom trim plate if the hole is not being
used for a BNC connection (6960-0041)
• Two track rails (54925-03711)
• Two clamp brackets (54925-01211)
• Top clamp bracket (R) (54925-01212)
• Top clamp bracket (L) (54925-01213)
• Sheet metal nuts (0590-0804)
• Four sets of screws:
• Gray-colored pan head screws for attaching the trim plate pieces
(3030-1768)
• Metallic pan head screws for attaching the side rails to the rack (3030-1782)
• Metallic M4 screws for attaching the feet brackets to the support tray and
top brackets to the oscilloscope (0515-0435)
• Set of M4 screws for attaching the feet brackets to the oscilloscope
(0515-0436)