Multi-Module Measurements
M9703B Hardware Extension of 89600 VSA Software
19
Multi-Module Measurements
The M9703B supports multi-module synchronization.
To synchronize two or more M9703Bs, you should create a configuration with several
instruments:
From the menu, go to Utilities > Hardware > Configurations, and click on Add New
Configuration button (
)). The 'New Hardware Configuration' dialog opens.
a. Select your Keysight MD2 digitizers from the list of
'Possible Logical Instrument'
and drag it or click on the
button to add it to the
'Configuration'
box.
b. Select Keysight MD2 digitizers from the list of
'Possible Logical Instrument'
and
drag it or click on the
button to add it to the
'Configuration'
box. Repeat this
step for each digitizer to be synchronized.
a. In the box below, select the units to be synchronized using the drop-down list: a
digitizer per Keysight MD2 Digitizer configuration previoulsy selected.
b. Select the name for this analyzer configuration.
c. Click OK to close the
'New Hardware Configuration'
dialog.
d. Before closing the 'Hardware Configurations' dialog, use the Current Analyzer
Configuration drop-down to select the newly created Configuration as the
current item.