10
Keysight M9602A/M9603A Startup Guide, Edition 3
Step 1: Unpack and Inspect the Module
Return the Module for Service
Should it become necessary to return a module for repair or service, follow the
steps below.
1. Review the warranty information shipped with your product.
2. Contact Keysight to obtain a Return Material Authorization (RMA) and return
address. For assistance in finding Keysight contact information, visit
www.keysight.com/find/assist
.
3. Write the following information on a tag and attach it to the malfunctioning
equipment.
•
Name and address of owner. A Post Office box is not acceptable as a return
address.
•
Product model number (for example, M9603A)
•
Product serial number (for example, MYXXXXXXXX). The serial number
label is located on the side of the module.
•
Description of failure or service required
4. Carefully pack the module in its original ESD bag and packing carton. If the
original carton is not available, use bubble wrap or packing peanuts and place
the instrument in a sealed container and mark the container “FRAGILE.”
5. On the shipping label, write ATTENTION REPAIR DEPARTMENT and the RMA
number.
If any correspondence is required, refer to the product by serial number and model
number.
When removing the module from the chassis
Immediately after powering down, the M9602A/M9603A module side panels
may be hot to cause a burn. Before removing the module from the chassis, take a
time for dissipating the heat, and make sure that the side panels are cool enough
to touch.
Содержание M9602A PXIe
Страница 1: ...Keysight M9602A M9603A PXIe Precision Source Measure Unit Startup Guide...
Страница 45: ......