Keysight M8290A Скачать руководство пользователя страница 12

Страница: 12 / 56

Keysight M8290A Getting Started Guide

Introduction

In the M8290A system configuration, the M8292A optical modulation

analyzer module (a 2-slot AXIe module) and a 4-channel single-slot

electrical digitizer module are available, both operating at 92 GSa/s

sampling rate.

Getting Started

The M829xA is a modular instrument packaged in the AXIe form factor.

AXIe is an open standard for high-performance modular instrumentation.

Different form factors of AXIe chassis are available: 13-slot, 5-slot and

2-slot AXIe chassis.

The M8290A Coherent Test Solution comprises an M9537A AXIe

embedded controller. This controller can control one or multiple M829xA

and consumes one module slot of the AXIe chassis. The M8290A Coherent

Test Solution comes with all required software pre-installed and

configured at the factory. Therefore, the information given in

Chapter 2

and

Chapter 3

of this guide is only relevant if the user wishes to reinstall a

software package or change the system configuration.

Additional Documents

Additional documentation can be found at:
•

http://www.keysight.com/find/M9514A

for 14-slot chassis related

documentation.

•

http://www.keysight.com/find/M9505A

for 5-slot chassis related

documentation.

•

http://www.keysight.com/find/M9502A

for 2-slot chassis related

documentation.

•

http://www.keysight.com/find/M9537A

for embedded AXIe controller

Содержание M8290A

























































Результаты поиска

Содержание M8290A

Отзывы:

Keysight M8290A, Руководство по началу работы, Страница: 12 / 56

Результаты поиска

Содержание M8290A

Отзывы: