Keysight M8050A High-Performance BERT Getting Started Guide
29
Basic Setup for M8050A
2
Return the Damaged/Defective Item to Keysight for Repair/Replacement
If anything is missing, defective, or damaged,
1 Review the warranty information shipped with your product or check
the warranty information on Keysight website.
•
To check the warranty information on your module, go to
www.keysight.com/find/warranty
and specify the module’s model
number (for example, M8050A) in the Product Number field, and
specify the serial number from the top of the module in the Serial
Number field.
2 Contact the nearest Keysight Sales Office. If you need assistance
finding Keysight contact information, go to
www.keysight.com/find/assist
(worldwide contact information for
repair and service).
Step 2 - Set up the M8050A
This step does not have to be performed while verifying the basic setup
for power up and connectivity. However, you will need to decide on a
benchtop or rack mounted usage of the M8050A after this basic
verification. For the procedures on how to set up the M8050A, refer to
the
M8000 Series Installation Guide
.
Ensure that the sum of power consumed by all modules should not exceed
the max DC power delivered from the AXIe Chassis. In this case, the
module connected at the last may not be turned on.
Step 3 - Set up the External Host Computer (not required for M8050A-BU3/BU5)
The host computer communicates with the ESM and instrument modules
in the chassis and hosts all the software components needed to use the
instrument modules.
NOTE
Perform this step if you are using a laptop or desktop computer as the
host computer.
