Keysight M5300A, Руководство для стартапов

Страница: 30 / 80

30 M5300A PXIe RF AWG Modules Startup Guide
2 Setting up the M5300A module
Section 2.1: Unpacking, Inspecting and Verifying the shipment
The module arrives packed in one small box. Before unpacking your
module(s), inspect the packaging container for evidence of mishandling
during transit. Inspect the carton carefully for any damage, or signs of
rough handling.
Remove the M5300A module from the packaging container and ensure
that all accessories are included. Inspect the module and accessories for
damage. If the contents appear damaged, notify your local Keysight
Technologies Inc. representative.
2.1.1: Precautions against ESD
Electrostatic discharge (ESD) can damage or destroy electronic
components. Use a static-safe workstation to perform all work on
electronic assemblies. Figure 4 shows a static-safe workstation using two
types of ESD protection:
Figure 4 Static-safe workstation for ESD protection
• Conductive table-mat and wrist-strap combination
• Conductive floor-mat and heel-strap combination
CAUTION
The module is shipped in materials which prevent damage from static.
The module should only be removed from the packaging in an anti-static
area ensuring that correct anti-static precautions are taken. Store the
module in an anti-static envelope when not in use.