Keysight B2980 Series, Руководство по программированию

Страница: 11 / 64

Keysight B2980 Programming Guide, Edition 1 1- 5
Controlling Keysight B2980
Controlling Various Functions
Controlling Various Functions
This section describes how to control various functions apart from the source output
and measurement functions.
• “Setting the Power Frequency”
• “Resetting to the Initial Settings”
• “Setting the Beeper”
• “Setting the Date and Time”
• “Performing the Self-Test”
• “Performing the Self-Calibration”
• “Setting the Operations at Power On”
• “Reading an Error Message”
• “Clearing the Error Buffer”
• “Reading Timestamp”
• “Clearing Timestamp”
• “Setting the Automatic Clear of Timestamp”
• “Confirming the Firmware Revision”
• “Setting the Remote Display Mode”
• “Making a Screen Dump”
• “Performing a File Operation”
Setting the Power Frequency
Power line frequency is set by the :SYST:LFR command.
Example
ioObj.WriteString(":SYST:LFR 50") ’50 Hz
ioObj.WriteString(":SYST:LFR 60") ’60 Hz
ioObj.WriteString(":SYST:LFR:DET:AUTO") ’Automatic Detection