Keysight AP1200A, Руководство пользователя, Страница: 29 / 97

Hardware Overview 3
Keysight AP1200A Multi-Protocol Vehicle Network Interface User Guide 29
Left Side Interfaces and Connectors
The left side of the AP1200A contains two components: the HD-26 connector and
a set of red and green LEDs as shown in Figure 3-3 .
Figure 3-3 AP1200A Left Side View
HD-26 Network Interface Connector
This male, high-density, 26-pin D-subminiature connector is the primary means
by which the AP1200A interfaces with vehicle networks. One of two network
interface cables is connected to this port, enabling CAN, LIN, and Ethernet
messages to pass between the network and the AP1200A. This connector also
provides primary power to the device.
Red and Green Status LEDs
You can determine the status of the AP1200A by observing the blink pattern of
these two LEDs. The patterns here will be identical to those seen in the keypad
button LEDs on the top membrane panel detailed in “Membrane LED Display and
Keypad” on page 32. The membrane LEDs are more convenient to use, but
Keysight preserved the traditional side panel LEDs for those accustomed to them
from working with the earlier device.
HD-26 Network
Interface
Connector
Red and Green
Status LEDs