Keysight 8162-C Series Скачать руководство пользователя страница 68

Страница: 68 / 110

Keysight N774-C & 8162-C Series User’s Guide

Definition of Terms

Specification wavelength range

The wavelength range for which all specifications and characteristics

apply, if not differently stated.

Spectral ripple (power meter; due to interference)

A coherent input signal causes optical interference1 between reflective

interfaces within the power meter's optical assembly, including the end

face of a connected fiber. Optical interference causes a wavelength

dependent periodic change of the power meter's responsivity. Spectral

ripple is defined as ± half the difference between the highest and the

lowest power resulting from the periodic change.

Conditions:

Constant input power, constant state of polarization (SOP).

Connector as specified. Other conditions as specified.

Measurement:

Using a laser source without spectral ripple or with known

(monitored) spectral ripple and linewidth < 100 MHz and stepping the

wavelength over the specified range. The periodic part in the

measurement result is separated by subtracting the polynomial 2

order

fit (low frequency part).

Storage conditions

Allowed temperature and humidity range for the non-operating

instrument. Wait for acclimation to within the “Operating temperature”

before turning on the instrument.

Total uncertainty

The maximum relative difference U between measured (displayed) power

M and actual (true) power P for a specified set of operating conditions,

expressed in percent. Powers expressed in Watts. Excluding "Noise pp

(dark)" (see,

Noise pp (dark)

on page 64) and "Drift (dark)" (see,

Drift (dark)

on page 62).

U = 100% * (M/P - 1)

Conditions:

Operating conditions as specified. Other conditions as

specified.

Содержание 8162-C Series















































































































Результаты поиска

Содержание 8162-C Series

Отзывы:

Похожие инструкции для 8162-C Series

Бренды по названию

Популярные бренды

Keysight 8162-C Series, Руководство пользователя

Результаты поиска

Содержание 8162-C Series

Отзывы:

Похожие инструкции для 8162-C Series

Бренды по названию

Популярные бренды